DETECTOR ACC PIR / BRACKET C GY SATEL
DETECTOR ACC PIR / BRACKET C GY SATEL
Nėra sandėlyje
Užsisakykite per artimiausias 0 valandas 0 minutes kad gautumėte prekę iki /10/2025
- 
                      
                    
                
                    Nemokamas pristatymas nuo 70€ Greitas ir patogus pristatymas visoje Lietuvoje 
- 
                      
                    
                
                    Išsiunčiame per 24 valandas darbo dienomis Jūsų užsakymas pradedamas vykdyti iškart po apmokėjimo 
- 
                      
                    
                
                    Garantuojame kokybę Kiekviena prekė patikrinta ir atrinkta užtikrinti patikimumą bei ilgaamžiškumą. 
Nepavyko įkelti atsiėmimo galimybės
The BRACKET C set of wall brackets is designed for mounting the outdoor detectors: OPAL, OPAL Plus, OPAL Pro and AOD-200. The set consists of two types: ball-joint bracket and angle bracket. The ball-joint bracket offers the swiveling vertical range of 60° and the horizontal swiveling range of 90°. This makes it easier to find the optimal position relative to the detection zone. However, if the premises require that the detector be set permanently at an angle of 45° relative to the wall, you can use the angle bracket. Each of the brackets is also provided with a tamper switch responding to any attempt to pull the device away from the wall.
| Vendor Homepage | www.satel.pl/en/produktid/1030 | 
| Unit Box Height | 0.135 | 
| Unit Box Length | 0.17 | 
| Unit Box Width | 0.04 | 
| Colour | Grey | 
| Units per Shipping Box | 1 | 
| Unit Calculated Volume | 0.000918 cubm | 
| Product Net Weight | 0.03 kg | 
| Unit Calculated Weight | 0.149 kg | 
            
              Aprašymas
            
            
          
          Aprašymas
The BRACKET C set of wall brackets is designed for mounting the outdoor detectors: OPAL, OPAL Plus, OPAL Pro and AOD-200. The set consists of two types: ball-joint bracket and angle bracket. The ball-joint bracket offers the swiveling vertical range of 60° and the horizontal swiveling range of 90°. This makes it easier to find the optimal position relative to the detection zone. However, if the premises require that the detector be set permanently at an angle of 45° relative to the wall, you can use the angle bracket. Each of the brackets is also provided with a tamper switch responding to any attempt to pull the device away from the wall.
| Vendor Homepage | www.satel.pl/en/produktid/1030 | 
| Unit Box Height | 0.135 | 
| Unit Box Length | 0.17 | 
| Unit Box Width | 0.04 | 
| Colour | Grey | 
| Units per Shipping Box | 1 | 
| Unit Calculated Volume | 0.000918 cubm | 
| Product Net Weight | 0.03 kg | 
| Unit Calculated Weight | 0.149 kg | 
- 
                Populiariausios mūsų kolekcijosIšsirinkite tai, kas atitinka Jūsų poreikius – nuo automobilių iki namų sprendimų.